1926.753(c) General.
1926.753(c)(2) A qualified rigger (a rigger who is also a qualified person) shall inspect the rigging prior to each shift in accordance with § 1926.251.
HAZARD: Employees exposed to struck-by/falling load hazards.
ABATEMENT: Rigging equipment MUST be taken out of service until it has been inspected by a qualified rigger.
1926.753(d) Working under loads.
1926.753(d)(2) When working under suspended loads, the following criteria shall be met:
1926.753(d)(2)(i) Materials being hoisted shall be rigged to prevent unintentional displacement;
HAZARD: Employees exposed to struck-by/falling load hazards.
ABATEMENT: Materials being hoisted MUST be rigged to prevent unintentional displacement.
NOTE: Steel I-Beam is not secured/rigged, it is resting on the wood.
